1 / 6

Byd Qin-Plus rear spoiler

Name: Byd Qin-Plus rear spoiler
Brand: BYD
Price: 11300 PHP
Availability: InStock

₱12,800.00 PHP

₱13,600.00 PHP

Save ₱800.00 PHP

Shipping fees will be calculated at checkout.

Material

Gloss Black Blade Tail (one pack) . Carbon Fiber Blade Tail (one pack).

Quantity

Aggressive Sporty Aesthetic: Sleek, low-profile aerodynamic design with Glossy Black or Carbon Fiber Texture finishes that complement the BYD Dragon Face design language.
Precision 1:1 Fitment: Molded using 3D laser scanning data of the Qin Plus trunk lid for seamless, factory-installed appearance aligned with integrated LED dragon claw taillights.
Aerodynamic Efficiency: Subtle upward lip design increases downforce at highway speeds, improving rear-axle stability and tire traction while optimizing airflow to reduce drag.
Lightweight & Durable Material: Premium ABS plastic resists UV rays, rain, and road debris without warping, cracking, or yellowing over time.
Non-Destructive Installation: Zero drilling required with no permanent modifications, preserving original paint and resale value while allowing easy removal.

1x Gloss Black Blade Tail, 1x Carbon Fiber Blade Tail

Installation Guide

Total time

20-30 minutes + 48h cure

Drilling required

No - adhesive

Warranty

Yes - non-invasive

Clean the Surface Thoroughly wash the trunk lid and use 70% Isopropyl Alcohol on a microfiber cloth to remove all wax, grease, and dust from the mounting area, as adhesion fails primarily due to invisible wax residues.
Dry Fit & Alignment Place the spoiler on the trunk without removing tape backing, center it perfectly, and use painter's tape to mark the exact position of the edges on the car body as a reference guide.
Apply Adhesion Promoter Apply a thin layer of 3M Adhesion Promoter to the marked area on the trunk lid to significantly strengthen the bond, especially in humid or cold climates.
Prepare the Tape Peel back about 2 inches of the red backing from each end of the spoiler's tape and fold it outward for easy removal during installation.
Final Attachment Align the spoiler using your tape marks, press down the exposed ends, and carefully pull the remaining red backing strips while applying firm downward pressure along the entire length.
Cure Time Apply firm pressure for at least 60 seconds and do not wash your car or drive at high speeds for 48 hours to allow the adhesive to fully bond.